XZYH-arc flux dryer is submerged arc automatic flux dedicated device with a rotating unit to the flux 360 C clockwise and counter-clockwise turn, flux in the slow roll over the heat evenly, drying, roller on the exhaust vent, evaporating gas quickly once and for all, to achieve a general drying oven to reach the drying effects. This machine is equipped with far-infrared radiation heating, thermostat, timer, heated, and heat loss small, high efficiency, easy to operate. The drying of flux moisture content less than 0.1 per cent, the maximum operating temperature 500 °C. The single large capacity drying flux domestic blank, the Ministry of Oil 5 Large Steel Pipe Plant of the Cheong Wa Dae official travel and award-winning
Main technical parameters
XZYH-arc flux dryer is submerged arc automatic flux dedicated device with a rotating unit to the flux 360 C clockwise and counter-clockwise turn, flux in the slow roll over the heat evenly, drying, roller on the exhaust vent, evaporating gas quickly once and for all, to achieve a general drying oven to reach the drying effects. This machine is equipped with far-infrared radiation heating, thermostat, timer, heated, and heat loss small, high efficiency, easy to operate. The drying of flux moisture content less than 0.1 per cent, the maximum operating temperature 500 °C. The single large capacity drying flux domestic blank, the Ministry of Oil 5 Large Steel Pipe Plant of the Cheong Wa Dae official travel and award-winning
Model XZYH - 60 XZYH - 100 XZYH - 150 - XZYH XZYH 300 - 500
To air flux capacity (KG) 60 100 150 300 500
The power supply 3 phase, 4-wire 3-Phase, 4-wire 3-Phase, 4-wire 3-Phase, 4-wire 3-Phase, 4-wire
to bake flux capacity (KG) 60 100 150 300 500
Electric power (KW) 3 4.8 7.5 13.5 9
XZYH - 60 KG
Load: drying room 60 kg storage room 60 kg
Maximum temperature 500 °C
Motor power; 0.75 KW
Heating power: 3 KW
Dimensions: 1700 mm x 700 mm x 1600 mm
Temperature-controlled time of 0 - 999 0 - 999 0 - 999 0 - 999 0 - 999 hours
temperature rising time: To 100 °C is not more than 60 minutes.
Shell Material: cold-rolled steel, high temperature baking paint process
insulation and sealing: High Temperature silicate aluminum needles and;
heating methods: stainless steel heating tube.
The material in the following way: pour-on
Temperature control: 0 - 999 minutes; speed about 5/min;
Timing the warm, dry end alarm, automatic shut-down, the indicator light shows the work status.
Flux drying dry evenly.
Oven weight: about 260 kg
Display: Several graphics
Sensor Type: K-type thermocouple.
Device Conditions of Use
Ambient temperature: 5 to 40 degrees C;
Ambient humidity: = 85 %. R H .;
Power supply: 3 phase, 4 wire system
inside the pot Material: High quality stainless steel.
|
